Why LED lights?

• They light up faster than bulbs, demanding attention from ignorant drivers
• They last much longer and use less power than bulbs
• There are no filaments to burn out or fail from vibration
• There are no glass bulbs to break or sockets to fail
• They look cool!

Why HeavyCycles' LED Retrofits?

• All LEDs used meet SAE/ECE/JIS color requirements for automotive applications
• The LEDS used are specifically for automotive lighting applications
• We use the same technology found in the top automakers' LED lights
• OEM connectors are used whenever possible, eliminating potential splice failures
• Turn signals can be integrated into most taillights
• They are much brighter than cheap LED bulbs, other "drop-in" LED boards, and stock bulbs... these are the best lights you can buy
• They are designed to fit your light specifically
• They work fantastic with clear or smoke colored lenses
• They are cool!
• Customer satisfaction is our priority

You may have seen similar products before, but these are by far the brightest and the best LED lights available.

We can make a retrofit for almost any light on any bike... stock, aftermarket, or custom.

If you have a light that we don't currently show a retrofit for, we can probably make it. Most custom lights will require you to send us your light or a spare for retrofitting. Custom retrofits normally have a 6 to 8 week turn-around. Please contact us if you have any questions. When inquiring about a light we do not already list, please send a picture with your inquiry.

Common Questions:

Q: Do these retrofitted lights draw a lot of power?

A: No... the current draw of our taillight retrofits, on average, is around half of what a stock bulb draws and the turn signals are even less..

Q: Are LEDs affected by vibration?

A: No... LEDs are solid state parts, there are no filaments or glass bulbs inside to be affected by vibration

Q: How long do LEDs last?

A: The approximate life of LEDs is around 100,000 hours or about 6,000,000 miles of riding at 60MPH

Q: Why are your LED retrofits better than others?

A: Because we use automotive grade LEDs in the proper SAE colors and with a correct viewing angle. Our retrofits are also considerably brighter than our competitors'. The LEDs we use are approximately four times as bright as conventional super-bright LEDs. And, besides a top quality retrofit, you can also get a professional installation into the light housing; something our competitors do not offer.

Q: Why do your retrofits seem more expensive than others?

A: Mainly because we are not just selling drop in boards with cheap socket connectors... in most cases, we sell the complete retrofit job, so you get the brightest LED retrofit available along with a top-notch installation into your light. We also use higher quality LEDs (more expensive too) that were designed for automotive use, allowing us to make LED retrofits that are brighter and perform better than others available.

Q: Do I have to get a taillight retrofit with integrated turn signals?

A: No, integrated turn signals are a popular option, but not required.

Q: Are the integrated turn signals legal?

A: Turn signals integrated into the taillight are legal, but, they shouldn't be your only turn signals, to be totally legal.

Q: Can I have turn signals integrated into my taillight and still run my stock or aftermarket turn signals?

A: YES! Just ask us about adding extra pass-through connectors onto the light to provide sockets for your existing turn signals to plug into or simply select that option when making your purchase.